Roland EGX-350, User Manual

Page: 28 / 124

Chapter 2 Installation and Setup
26
2-1 Checking the Included Items
The following items are included with the machine. Make sure they are all present and accounted for.
Power cord Depth regulator nose
(nose unit)
Noes-unit retainer Wrench
Character cutter
(diameter 3.175 mm,
with cutter holder)
Flat cutter
(diameter 3.175 mm,
with cutter holder)
Spare tool retaining screw Hexagonal wrench
Collet
(diameter 3.175 mm)
Collet
(diameter 4.36 mm)*1,*2
Hexagonal screwdriver Handy panel
Adhesive sheet Vacuum-adapter set User’s Manual Software guide
(Roland Software Package)
(Roland Engrave Studio)
Roland Software Package
CD-ROM
Roland Engrave Studio
CD-ROM
*1: This is for diameter-4.36 mm character or flat cutters. It cannot be used with diamond scrapers or end mills.
*2: Never use a diameter-4.36 mm cutter at a spindle speed of 15,000 rpm or higher. There is danger of damage to the
spindle unit due to vibration.
Retaining
screw
Spring