Roland EGX-350, User Manual

Page: 33 / 124

31
Chapter 2 Installation and Setup
2-3 Cable Connections
Connecting the Power Cord
WARNING
Connect to an electrical outlet that complies with this machine’s ratings (for volt-
age and frequency).
Incorrect voltage or insufficient current may cause fire or electrical shock.
WARNING Handle the power cord, plug, and electrical outlet correctly and with care. Never
use any article that is damaged.
Using a damaged article may result in fire or electrical shock.
WARNING
When using an extension cord or power strip, use one that adequately satisfies
the machine’s ratings (for voltage, frequency, and current).
Use of multiple electrical loads on a single electrical outlet or of a lengthy extension
cord may cause fire.
WARNING
Connect to ground.
This can prevent fire or electrical shock due to current leakage in the event of
malfunction.
WARNING Connect to an electrical outlet. Never connect directly to a power distribution
panel or other such fixed wiring equipment.
Doing so increases the hazard of fire or electrical shock.
This machine requires a single-phase commercial power outlet, which rated at 1.3 A or higher ( for 100 to 120 V) or 0.6 A or
higher (for 220 to 240 V).
Right side
Electrical outlet
Power cable