Getting Started
R&S
®
ZVA
40
Quick Start Guide 1145.1090.62 ─ 10
To enter a character string
1. Place the cursor into a character data input field in a dialog.
2. Press the DATA ENTRY keys as if you were writing a short message on your mobile
phone.
● Press 0 to 9 once to enter the corresponding numbers.
● Press the keys repeatedly to select one of the other characters assigned to the
key.
● Wait 2 seconds to confirm an entry.
● Use . or to enter a dot or a hyphen.
● Use the sign key to change from upper case to lower case and vice versa.
● Use G/n, M/μ, or k/m to enter the letters G, M or K (case-insensitive).
● Use the BACK key to correct wrong entries, deleting the character to the left of
the current cursor position.
● Press OK ENTER to complete an entry.
● Press ESC CANCEL to close the popup dialog, discarding the entries made.
3. To enter letters other than G, M or K, you can also use one of the following methods:
● Turn the rotary knob until the desired letter appears in the character input field.
● If the active input field has a symbol, then use the analyzer's on-screen key-
board.
● Otherwise, use a mouse and Windows XP's on-screen keyboard.
2.3.2.2
Using the Analyzer's On-Screen Keyboard
The on-screen keyboard allows you to enter characters, in particular letters, without an
external keyboard. It is available for all character input fields which have a symbol.
Operation with front panel keys
1. Place the cursor into a character data input field in a dialog or in the numeric entry
bar.
2. Press OK or the
key in the NAVIGATION keypad to open the on-screen keyboard.
3. Use the cursor keys in the NAVIGATION keypad or turn the rotary knob to move the
cursor to a character.
4. Press OK ENTER or the rotary knob to select the character for the input string.
5. After completing the input string use the
key to move to the OK button.
6. Press OK ENTER or the rotary knob to apply your selection and close the keyboard.
Operation with a mouse
1. Click the symbol to open the on-screen keyboard.
2. Click a sequence of characters and OK to apply your selection and close the key-
board.
Basic Tasks
