manualshive.com logo in svg

Rohde & Schwarz ZVA110, Quick Start Manual

Share
Download
Rohde & Schwarz ZVA110 Quick Start Manual Download Page 37

Getting Started

R&S

®

 ZVA

37

Quick Start Guide 1145.1090.62 ─ 10

6. In the "Save As" dialog opened, select a file location, format and name and activate

"Save".
The active setup is stored to a file and can be reused in a later session.

Proceed as described in 

chapter 1.4, "Starting the Analyzer and Shutting Down"

,

on page 21 to shut down your analyzer.

2.2 Performing a Transmission Measurement

A transmission measurement involves the same steps as a reflection measurement. Note
the following differences:

●

The test setup for transmission measurements involves two or more DUT and ana-
lyzer ports. For a two-port transmission measurement, you can connect the input of
your DUT to port 1 of the analyzer, the output to port 2. After a preset, the analyzer
will measure the forward transmission S-parameter S

21

.

●

The analyzer provides special calibration types for transmission measurements. Use
the calibration wizard and select an appropriate type. A TOSM calibration will correct
the system errors for all transmission and reflection S-parameters.

●

The S-parameter wizard ("System – Measurement Wizard – S-parameter" wizard)
will guide you through the essential steps of a standard transmission measurement.

2.3 Basic Tasks

The following sections describe how to solve basic tasks that you will frequently encoun-
ter when working with the instrument. In particular you can learn how to access instrument
functions and control dialogs without a mouse and keyboard.

2.3.1 Control via Front Panel Keys

Although a mouse and external keyboard simplify the operation of the instrument, you
can access all essential functions using the keys on the front panel. The following exam-
ples are intended to make you familiar with front panel key operation.

To access a particular menu command ...

1. Press the MENU key in the SUPPORT keypad to access the menu bar and open the

"File" menu.

2. Use the keys in the NAVIGATION keypad or the rotary knob to navigate between and

within the menus.

● Use the "Cursor Left" and "Cursor Right" keys to change between the different

menus in the menu bar. When the first option in a pull-down menu is a submenu,
the submenu will be opened first before proceeding to the next option in the menu
bar.

 

 

 

Performing a Transmission Measurement

Summary of Contents for ZVA110








































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands