manualshive.com logo in svg

Rohde & Schwarz ZVA110, Quick Start Manual

Share
Download
Rohde & Schwarz ZVA110 Quick Start Manual Download Page 28

Preparing the Analyzer for Use

R&S

®

 ZVA

28

Quick Start Guide 1145.1090.62 ─ 10

1.6.2 Remote Desktop Connection

Remote Desktop is a Windows

®

 application which can be used to access and control the

analyzer from a remote computer through a LAN connection. While the measurement is
running, the analyzer screen contents are displayed on the remote computer, and
Remote Desktop provides access to all of the applications, files, and network resources
of the analyzer.

To set up a Remote Desktop connection,

1. Connect the analyzer to a LAN and determine its IP address; see 

chapter 1.6,

"Remote Operation in a LAN"

, on page 26.

2. Set up your remote computer (integrated in the LAN) to use Remote Desktop and

create the Remote Desktop connection to the analyzer.

For detailed information about Remote Desktop and the connection refer to the Win-
dows

®

 XP Help.

1.7 Windows XP

The analyzer is equipped with a Windows

®

 XP operating system which has been con-

figured according to the instrument's features and needs. Changes in the system con-
figuration can be necessary in order to:

●

Establish a LAN connection

●

Customize the properties of the external accessories connected to the analyzer

●

Call up additional software tools

Modifications of the operating system

The operating system is adapted to the network analyzer. To avoid impairment of instru-
ment functions, only change the settings described in this manual. Existing software must
be modified only with update software released by Rohde & Schwarz. Likewise, only
programs authorized by Rohde & Schwarz for use on the instrument must be executed.

The "Start" menu of the operating system is accessed by pressing the Windows key in
the SUPPORT keypad. All necessary settings can be accessed from the "Start" menu,
in particular from the Control Panel.

 

 

Windows XP

Summary of Contents for ZVA110








































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands