Rohde & Schwarz ZVA110, Quick Start Manual

Page: 36 / 103

Getting Started
R&S
®
ZVA
36 Quick Start Guide 1145.1090.62 ─ 10
The Smith chart shows lines of constant real and imaginary part of the impedance in
the reflection coefficient plane.
Tip: Refer to section chapter 3.2.4, "Display Formats and Diagram Types" ,
on page 65 to learn more about the diagram properties.
2.1.5 Saving and Printing Data
The analyzer provides standard functions for saving measurement settings and for print-
ing the results. You can use these functions as if you were working on a standard PC.
Moreover you can export your trace data to an ASCII file and reuse it in a later session
or in an external application.
Data transfer is made easier if external accessories are connected to the analyzer or if
the instrument is integrated into a LAN. Refer to
Connecting External Accessories and
chapter 1.6, "Remote Operation in a LAN" , on page 26 to obtain information about the
necessary steps.
1. Press TRACE FUNCT and activate "Import/Export
–
Data Export".
2. In the "Export Data" dialog opened, select a file location, format and name and acti-
vate "Save".
The active trace data is written to an ASCII file.
3. Press PRINT in the SYSTEM keypad and select "Print Now" to create a hardcopy of
your diagram.
4. Select "Print to File..." or "Print to Clipboard" to copy the diagram to a file or an external
application.
5. Press SAVE in the SYSTEM keypad.
Performing a Reflection Measurement