manualshive.com logo in svg

Rohde & Schwarz ZVA110, Quick Start Manual

Share
Download
Rohde & Schwarz ZVA110 Quick Start Manual Download Page 22

Preparing the Analyzer for Use

R&S

®

 ZVA

22

Quick Start Guide 1145.1090.62 ─ 10

To shut down the analyzer, proceed as follows:

1. Press the STANDBY key to save the current setup, close the NWA application, shut

down Windows

®

 XP and set the instrument to standby state. Of course you can also

perform this procedure step by step like in any Windows session.

2. If desired, set the AC power switch to position 0 (Off).

Risk of data loss

It is strongly recommended to switch the analyzer to standby state before disconnecting
it from the AC supply. If you set the power switch to 0 while the NWA application is still
running, you will lose the current settings. Moreover, loss of program data can not be
excluded if the application is terminated improperly.

Minimizing the NWA application

With a minimized NWA application, you can access your analyzer's Windows

®

 desktop

or run other applications. To start the NWA application with a minimized window on a
continuing basis, right-click the NWA shortcut icon on the desktop and open the "Prop-
erties" dialog. In the "Shortcut" tab, select "Run: Minimized".

After a software update the NWA application is started with a maximized window again.
Moreover, if a second NWA application is started after a first, minimized application, this
will cause the first application to come to the foreground.

1.5 Connecting External Accessories

The equivalent USB ports on the front and rear panel of the analyzer can be used to
connect a variety of accessories:

●

A mouse simplifies operation of the instrument using the controls and dialogs of the
Graphical User Interface (GUI).

●

A keyboard simplifies the entry of data.

●

A printer generates hard copies of the screen contents.

In addition the analyzer provides interfaces for monitor connection and network integra-
tion:

●

An external monitor shows the magnified Graphical User Interface (GUI) with all dia-
gram areas and controls.

●

A LAN connection can be established in order to access the hard disk or control the
analyzer from an external PC.

 

Connecting External Accessories

Summary of Contents for ZVA110








































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands