Rohde & Schwarz SMBV100A, Manual

Page: 625 / 780

Remote Control Commands
R&S
®
SMBV100A
608 Operating Manual 1407.6062.32 ─ 08
Clock Settings
This section lists the remote control commands, necessary to configure the clock.
The clock settings are available for R&S SMx and R&S AMU instruments only.
[:
​
SOURce<hw>]:
​
BB:
​
MCCW:
​
CLOCk:
​
MODE
​
......................................................................608
[:
​
SOURce<hw>]:
​
BB:
​
MCCW:
​
CLOCk:
​
MULTiplier
​
................................................................608
[:
​
SOURce<hw>]:
​
BB:
​
MCCW:
​
CLOCk:
​
SOURce
​
...................................................................609
[:
​
SOURce<hw>]:
​
BB:
​
MCCW:
​
CLOCk:
​
SYNChronization:
​
MODE
​
............................................609
[:
​
SOURce<hw>]:
​
BB:
​
MCCW:
​
CLOCk:
​
SYNChronization:
​
EXECute
​ .........................................610
[:SOURce<hw>]:BB:MCCW:CLOCk:MODE <Mode>
The command enters the type of externally supplied clock (
:BB:MCCW:CLOCk:SOURce
EXTernal
). When
MSAMple
is used, a multiple of the sample clock is supplied via the
CLOCK connector and the sample clock is derived internally from this. The multiplier is
entered with the command
BB:MCCW:CLOCk:MULTiplier
.
Parameters:
<Mode> SAMPle | MSAMple
*RST:
SAMPle
Example: BB:MCCW:CLOC:MODE SAMP
selects clock type "Sample", i.e. the supplied clock is a sample
clock.
[:SOURce<hw>]:BB:MCCW:CLOCk:MULTiplier <Multiplier>
The command specifies the multiplier for clock type "Multiple Samples"
(
:BB:MCCW:CLOCk:MODE MSAM
) in the case of an external clock source.
Parameters:
<Multiplier> integer
Range:
1 to 64
Increment: 1
*RST:
4
Example: BB:MCCW:CLOC:SOUR EXT
selects the external clock source. The clock is supplied via the
CLOCK connector.
BB:MCCW:CLOC:MODE MSAM
selects clock type "Multiple Samples", i.e. the supplied clock has
a rate which is a multiple of the sample rate.
BB:MCCW:CLOC:MULT 12
the multiplier for the external clock rate is 12.
SOURce Subsystem