R&S FSH
Digital Modulation Analyzer
Configuring Measurements in Receiver Mode
Operating Manual 1309.6275.12 - 14
175
For more information on isotropic antennas see "
" on page
While using the isotropic antenna result display, you can set up the measurement as
usual.
Limits
A limit check tests the actual results against a set of predefined values to see if the
measurement results are inside a specified boundary. In the Limits result display, the
R&S FSH shows the results of the limit check.
If the results are in the allowed range of values, the limit check has passed. The results
are highlighted green.
If the results violate one of the limits,
the limit check has failed. The results
are highlighted red.
A complete limit check usually consists
of the limit definition of several results.
The complete limit check only passes
if every individual limit check also
passed. In that case, the R&S FSH
shows "
LIMITS PASSED
" in the result
display. If even one limit has failed, the
R&S FSH shows "
LIMITS FAILED
".
By default, the R&S FSH tests against default limits. These limits have been defined
according to the standard.
M
Press the "Result Display" softkey.
M
Select the "Limits" menu item.
You can create and edit digital modulation limits with the R&S FSH4View software
package and then transfer them into the internal memory of the R&S FSH.
For more information see "
