Robin RS 1100, User Manual, Page: 90 / 104

【
Start Setup
】
80 【
Exit Setup
】
Restore the Default Setup Value of PDF417
Allow to Read PDF417 or not
Allow to Read PDF417
Prohibit Reading PDF417
Note: the scanner will become unable to read PDF417 by reading the setup barcode “Prohibit Reading PDF417”,
thus, if the scanner is unable to read the PDF417, please try t
o read the setuo barcode “allow to read PDF417”.
Note: PDF417 can support the barcode with maximum 48 lines x 18 rows.
CodeID Setup
To activate the setup function by reading “CodeID setup”, then read the hexadcimal value inaccordance with the character
which will be set to the CodeID.
Code ID Setup
Example: Set the CodeID ofPDF417
to “p” (the hexadcimal value is 0x70).
1.
Read the “Start Setup” barcode.
2.
Read the “CodeID Setup” barcode.
3.
Read the numeric barcode “7”, “0” (see the appendix—numeric barcode)
4.
Read the “Save” barcode.(see the appendix—numeric barcode)
5.
Read the “Exit Setup” barcode.
MicroPDF417
Restore the Default Value
By reading the barcode, the parameter setup of MicroPDF417 will be restored to the factory default state.
Restore the Default Setup Value of MicroPDF417
Allow to Read MicroPDF417 or not