Robin RS 1100, User Manual, Page: 76 / 104

【
Start Setup
】
66 【
Exit Setup
】
4.
Read the “Save” barcode.(see the appendix—numeric barcode)
5.
Read the “Exit Setup” barcode.
Check Setup
Code 39 barcode data does not compulsively include the check digit, if check digit exists, then it is the last character.
Check digit is calculated according to all the datas, for checking if the data is correct or not.
 Set “No Check”, the scanner will transmit all the barcode data
 Set “Check but do not Send Check digit”, the scanner will check according to the last bit, if successful, all the data
except for the check digit will be transmitted, if failed, then the scanner will indicate “barcode reading failed”

Set “Check and Send Check digit” the scanner will check according to the last bit, if successful, all the data including
the check digit will be transmitted, the check digit will be treated as the last bit of the normal data; if failed, then the
scanner will indicate “barcode reading failed”
No Check
Check and Send Check digit
Check but do not Send Check digit
Note: by setting “do not send the check digit”, if the data length except for the 1 character check digit is less than the
minimum barcode reading limit, the barcode reading will be failed. (For example: the scanner set the the minimum barcode
reading leng
th of Code 39 to 4 characters and “do not send check digit”, in such circumstances,the scanner is not able to
read the Code 39 with 4 characters. )
Set whether to Send the start and stop character or not
There are two characters of “*”before and after the Code39 barcode data as the start and stop character. The system can
set whether or not to send the start and stop character after successful barcode reading.
Send the Start and the Stop Character
Do not Send the Start and the Stop Character
Set the Reading Range of ASCII Code
Code 39 can consist all the ASCII character, by default, the scanner is only able to read part of the ASCII character, by
setting, the scanner can activiate the function of reading the intact ASCII character.