Robin RS 1100, User Manual, Page: 79 / 104

【
Start Setup
】
【
Exit Setup
】 69
No Check
Check and Send Check Digit
Check but do not Send Check Digit
Note: by setting “do not send the check digit”, if the data length except for the 1 character check digit is less than the
minimum barcode reading limit, the barcode reading will be failed. (For example: the scanner set the the minimum
barcode reading leng
th of Codabar to 4 characters and “do not send check digit”, in such circumstances,the scanner is not
able to read the Codabar with 4 characters. )
Start and Stop Character Setup
Do not Send the Start and Stop Character
Send the Start and Stop Character
Set “ABCD/ABCD” as the Start and Stop Character
Set “ABCD/TN*E” as the Start and Stop Character
Set “abcd/abcd” as the Start and Stop Character
Set “abcd/tn*e” as the Start and Stop Character
Set the Barcode Reading Length
The scanner is only able to read the Codabar with tramsmission content length falls in the limited range, the range is
consisted of the maximum value and minimum value in units of character, the Codabar exceeds the range can not be read
or transmitted.

Re
ad the barcode of “Set the Minimum Length Limit” to adjust the minimum length limit.
 Read the barcode of “Set the Maximum Length Limit” to adjust the maximum length limit.