【
Start Setup
】
【
Exit Setup
】
45
3.
Read the numeric barcode “7”, “0” (see the appendix—numeric barcode)
4.
Read the “Save” barcode.(see the appendix—numeric barcode)
5.
Read the “Exit Setup” barcode.
ISBN
Restore Default Value
By reading the barcode, the parameter setup of ISBN will be restored to the factory default state.
Restore the Default Setup Value of ISSN
Allow to Read ISBN or not
Allow to Read ISBN
Prohibit Reading ISBN
Note:the
scanner will become unable to read ISBN by reading the setup barcode “Prohibit Reading ISBN”, thus, if the
scanner is unable to read the ISBN, please try to read the setuo barcode “allow to read ISBN”.
ISBN Data Length Setup
Adopt 13 Characters
Adopt 10 Characters
CodeIDSetup
To activate the setup function by reading “CodeID setup”, then read and save the hexadcimal value inaccordance with the
character which will be set to the CodeID.
CodeID Setup
Example: Set the CodeID of ISBN
to “p” (the hexadcimal value is 0x70).
1.
Read the “Start Setup” barcode.
2.
Read the “CodeID Setup” barcode.
Summary of Contents for RS 1100
