【
Start Setup
】
46
【
Exit Setup
】
3.
Read the numeric barcode “7”, “0” (see the appendix—numeric barcode)
4.
Read the “Save” barcode.(see the appendix—numeric barcode)
5.
Read the “Exit Setup” barcode.
UPC-E
Restore Default Value
By reading the barcode, the parameter setup of UPC-E will be restored to the factory default state.
Restore the Default Setup Value of UPC-E
Allow to Read UPC-E or not
Allow to Read UPC-E
Prohibit Reading UPC-E
Note:the scanner will become unable to read UPC-
E by reading the setup barcode “Prohibit Reading UPC-E”, thus, if the
scanner is unable to read the UPC-
E, please try to read the setuo barcode “allow to read UPC-E”.
Set Whether or not to Send the Check Digit
The data of UPC-E barcode is fixed 8 digit, the 8st bit is the check bit which is used in checking the correctness of alll the 8
digit.
Send the Check Digit
Do not Send the Check Digit
CodeID Setup
To activate the setup function
by reading “CodeID setup”, then read and save the hexadcimal value inaccordance with the
character which will be set to the CodeID.
Summary of Contents for RS 1100
