Robin RS 1100, User Manual, Page: 43 / 104

【
Start Setup
】
【
Exit Setup
】 33
After the setup of “it is allowed to add custom suffix”is finished, by reading any barcode, the scanner will add custom suffix
character string “AGE” after the data.
End Mark Suffix
Add End Mark Suffix or Not
End mark suffix is used to declear the end of a intact data information, which must be the last part of the data, no other
data will be added behind it.
The content, decoding informatuon and prefix of custom suffix can be formated, but the end mark suffix can not, and this is
the fundamental differences between end mark suffix and custom suffix.
It is not Allow to Add End Mark Suffix
Allow to Add End Mark Suffix
Define the End Mark Suffix
Read the “Define the End Mark Suffix” first, and then read the hexadecimal value of every byte of the suffix character
string which will be set, according to priority.
Set the end mark suffix to 0x0D, ,and make it can be
sent
Set the End Mark Suffix
Set the end mark suffix to 0x0D,0x0A ,and make it
can be sent
For Example: Set the end mark of Windows Operation System to “newline”
1. Read the
“Start Setup” barcode.
2. Read the
”Set the End Mark Suffix” barcode.
3. Read the
“Set the end mark suffix to 0x0D,0x0A ,and make it can be sent”.
4. Read the
“Save” barcode.
5. Read the
“Exit Setup” barcode.