Robin RS 1100, User Manual, Page: 59 / 104

【
Start Setup
】
【
Exit Setup
】 49
Allow to Read UPC-A or not
Allow to Read UPC-A
Prohibit Reading UPC-A
Note:the scanner will become unable to read UPC-
A by reading the setup barcode “Prohibit Reading UPC-A”, thus, if the
scanner is unable to read the UPC-
A, please try to read the setuo barcode “allow to read UPC-A”.
CodeID Setup
To activate the setup function by re
ading “CodeID setup”, then read the hexadcimal value inaccordance with the character
which will be set to the CodeID.
CodeID Setup
Example: Set the CodeID of UPC-A
to “p” (the hexadcimal value is 0x70).
1.
Read the “Start Setup” barcode.
2.
Read the “CodeID Setup” barcode.
3.
Read the numeric barcode “7”, “0” (see the appendix—numeric barcode)
4.
Read the “Save” barcode.(see the appendix—numeric barcode)
5.
Read the “Exit Setup” barcode.
Set Whether or not to Transimit the Check Digit
The barcode data of UPC-A is fixed of 13 digit, the 13
rd
digit is the check digit.
Send the Check Digit
Do not Send the Check Digit
Set Whether or not to Transmit the System Digit
“0”
The first character of UPC-E barcode is the system Digit
, the value is “0”.