Robin RS 1100, User Manual, Page: 22 / 104

【
Start Setup
】
12 【
Exit Setup
】
Chapter 2 General Configuration
Introduction
There are two ways to setup the barcode engine.
Setting Barcode
To used reading a series of special barcode to setting the barcode engine. In the following sections, we will introduce the
available set of options and features and provide a corresponding setting code.
Setting Command
To used PC to send the setting command string to setting the barcode engine. In the following chapters, in addition to
setting code, we will introduce the setting of the command string.
Notice: All the setting command will keep in barcode engine except a few temporary setting commands will
disappear after reboot or power off.
Format of Setup Barcode
This is the sample of setup barcode.
The setup barcode label is consisted of three parts:
1
、
The barcode portion of the setup barcode.
2
、
The command description or code string of corresponding to the setup barcode.
3
、
The name of the setup barcode or function, such as the function of turn off setup code.