Robin RS 1100, User Manual, Page: 50 / 104

【
Start Setup
】
40 【
Exit Setup
】
8.
Read the ‘Save” barcode.(see the appendix—numeric barcode)
9. Read the
“Exit Setup” barcode.
EAN-8
Restore Default Value
By reading the barcode, the parameter setup of EAN-8 will be restored to the factory default state.
Restore the Default Setup Value of EAN-8
Allow to Read EAN-8 or not
Allow to Read EAN-8
Prohibit Reading EAN-8
Note:the scanner will become unable to read EAN-8
by reading the setup barcode “Prohibit Reading EAN-8”, thus, if the
scanner is unable to read the EAN-8
, please try to read the setuo barcode “allow to read EAN-8”.
Code ID Setup
To activate the setup function by reading “CodeID setup”, then read the hexadcimal value inaccordance with the character
which will be set to the CodeID.
CodeID Setup
Example: Set the CodeID of EAN-
8 to “p” (the hexadcimal value is 0x70).
1.
Read the “Start Setup” barcode.
2.
Read the “CodeID Setup” barcode.
3.
Read the numeric barcode “7”, “0” (see the appendix—numeric barcode)
4.
Read the “Save” barcode.(see the appendix—numeric barcode)
5.
Read the “Exit Setup” barcode.
Set Whether or not to Read 2-Digit Extracode
2-Digit extended code means to add 2-digit numeric barcode behind the normal barcode.