Robin RS 1100, User Manual, Page: 58 / 104

【
Start Setup
】
48 【
Exit Setup
】
 By setting “The Barcode Must Include 2-Digit Extracode,the scanner is only able to read the 2-digits extracode.
Set Whether or not to Transmit the System Char
acter “0”
The first character of UPC-
E barcode is the system character, the fixed value is “0”.
Extension Setup
 “Do not Extend the Barcode Infornmation” means keep the original barcode type and data bit,
 “Extend the Barcode Infornmation into UPC-A” means extend the data bit and leave the barcode type unchanged.
 “Extend the Barcode Infornmation and Type into UPC-A” means extend the barcode type and data bit.
Do not Extend the Barcode Infornmation
Extend the Barcode Infornmation into UPC-A
Extend the Barcode Infornmation and Type into UPC-A
UPC-A
Restore Default Value
By reading the barcode, the parameter setup of UPC-A will be restored to the factory default state.
Restore the Default Setup Value of UPC-A
Do not Transmit System Character “0”
Transmit System Character “0”