
【
Start Setup
】
14
【
Exit Setup
】
command.
Setup Protocol
1.
Enter to setup state: To send
“$$$$”to the scanner
,
reply
“@@@@” when success.
2.
Exit fromsetup state: To send
“%%%%” to the scanner
,
reply
“^^^^”when success.
3.
If you received
“^^^^” reply from scanner, that mean the scanner was exit from setup state.
4.
The format of command is to add
“
#
”in front of each command, and end by“
;
”.
For example:
“#99900030;”.
5.
The scanner will reply a success message, by add
“!” in front of setting command and end by “;”.
For e
xample: “!99900030;”.
6.
The scanner also will reply anerror
message, by add “?” in front of setting command and end by “;”.
For e
xample: “?99900030;”
7.
The scanner will reply “!xxxxxxxx;” and contains in "&{" and "}" the query results, when you sending a query command.
For example:
Sending
“#99900301;” query command for asking the firmware version.
Received
“!99900301;&{Firmware v1.7.5;Decoder v1.00.023.C6;|FD25430B}”.
Description:
The “Firmware v1.7.5;Decoder v1.00.023.C6;|FD25430B” among in "&{" and "}" is the query results. And
“|FD25430B” is the data string CRC32 checksum value.
By definition, if the feedback may contain the invisible character, it will be shown as hexadecimal characters, every two
characters indicate one character value. Such as:
“
&
{AAAA100423C5008001FF400001FF400001FF400001FF400001FF40000000408000004080000040000000408000
0040800000408006FF40000000408000004080000040800000408006FF400006FF400006FF400006FF400004FF400004F
F400002FF400004FF400004FF400004FF400001FF400000000000006A75667467646E426863657271776C6F766973626
1797A706D5-2000000000000000000000000000000000000000000000000000000000000000000600000FEB2A2F4CCCF
D390ADC8D38FF5E6D99DAA|E1DFA587}”
8.
If the setting command contains parameters, then the command will be combined according to the command system
definition.
For example: The combined command string which is stop by 0x0D and 0x0A. The combined sending commands are:
“#99904112;#99900000;#99900015;#99900000;#99900012;#99900020;”.
Summary of Contents for RS 1100
