Robin RS 1100, User Manual, Page: 65 / 104

【
Start Setup
】
【
Exit Setup
】 55
5.
Read the “Exit Setup” barcode.
Deutsche 14
Restore the Default Value
By reading the barcode, the parameter setup of Deutsche14 will be restored to the factory default state.
Restore the Default Setup Value of Deutsche14
Allow to Read Deutsche14 or not
Allow to Read Deutsche14,but do not send the check digit
Prohibit Reading Deutsche14
Allow to Read Deutsche14 and send the check digit
Note: the scanner will become unable to read Deutsche14 by reading the setup barcode “Prohibit Reading Deutsche14”,
thus, if the scanner is unable to read the Deutsche14, please try to read the setuo barcode “allow to read Deutsche14”.
Deutsche 14 uses the same coding method as ITF-14 and normal ITF, so if all these are used at the same time, the
misunderstanding of function setup and decoding will easily occure, thus, it is suggested to turn off the Deutsche 14 if it is
not in use.
CodeID Setup
To activate
the setup function by reading “CodeID setup”, then read the hexadcimal value inaccordance with the character
which will be set to the CodeID.
CodeID Setup
Example: Set the CodeID ofDeutsche14
to “p” (the hexadcimal value is 0x70).
1.
Read the “Start Setup” barcode.
2.
Read the “CodeID Setup” barcode.