Robin RS 1100, User Manual, Page: 28 / 104

【
Start Setup
】
18 【
Exit Setup
】
The scanner will begin the next barcode reading automatically after a successful reading, if the next barcode is same
with last one, the scanner will discard the barcode, and waiting for the next different barcode. This setting can be stop
when the scanner trigger be pressed again.

Recounting After Successful Reading
Setup the scanner recount the reading timer after successful a barcode reading.
Intermittent Reading Mode
Device will intermittent reading the barcode. Whether reading successful or not, the reading twice intervals are fixed,
intermittent time default value is 1sec, this value can be change. The length of reading time is fixed on 100 ms.
【
Intermittent Reading
】
【
Set the Scanning Time Interval
】
Note: The time interval is counted in units of 500ms, which can be set in 15 levels (from 01-15). For example
Example:
The steps of set the time interval to 5000ms.
1.
Read the “Start Setup” barcode.
2.
Read the “Set the Scanning Time Interval” barcode.
3. Read the numeric
“1” and ’0” barcode.
4.
Read the “Exit Setup” barcode.
Sense Reading Mode
The device do not need to trigger the scan, and will auto detecting the scan environment changed to start to reading. The
reading finished, device will turn to monitoring state to waiting for the next changes in the environment. The surrounding
environment sensor sensitivity can be setup. During this mode, click the trigger button can also start reading..
【
Sense Reading
】