Robin RS 1100, User Manual, Page: 66 / 104

【
Start Setup
】
56 【
Exit Setup
】
3.
Read the numeric barcode “7”, “0” (see the appendix—numeric barcode)
4.
Read the “Save” barcode.(see the appendix—numeric barcode)
5.
Read the “Exit Setup” barcode.
Deutsche 12
Restore the Default Value
By reading the barcode, the parameter setup of Deutsche12 will be restored to the factory default state.
Restore the Default Setup Value of Deutsche12
Deutsche 12 Allow to Read Deutsche 12 or not
Allow to Read Deutsche12,but do not send the check digit
Prohibit Reading Deutsche12
Allow to Read Deutsche12 and send the check digit
Note: the scanner will become unable to read Deutsche12 by reading the setup barcode “Prohibit Reading Deutsche12”,
thus, if the scanner is unable to read the Deutsche12, please try to read the setuo barcode “allow to read Deutsche12”.
Deutsche 12 uses the same coding method as ITF-12 and normal ITF, so if all these are used at the same time, the
misunderstanding of function setup and decoding will easily occure, thus, it is suggested to turn off the Deutsche 12 if it is
not in use.
CodeID Setup
To activate
the setup function by reading “CodeID setup”, then read the hexadcimal value inaccordance with the character
which will be set to the CodeID.