Model menu
F X - 4 0
17. MODEL MENUS
This menu is used for programming the model type-specific
settings for individual model memories - especially the mixer
functions. This data is stored under the programmed model
name in the appropriate memory.
At the main screen activate the Model menu by touching the
field showing the model aircraft picture. The overview of Model
menus is now displayed. The Select menu varies according to
the model type you have selected.
• MODEL MENU - OVERVIEW OF FIXED-WING
MODELS
At this point different options are presented according to the
type of wing and / or tail you have selected. The software dis-
plays the relevant functions only, in order to keep the display
as clear and unambiguous as possible; the remainder of the
menus are suppressed.
The following menu points are offered for the current model
configuration:
Servo monitor
= Servo travel display
Flight mode
= Flight mode select
Transmitter control AFR / D/R
= Transmitter control
settings, Dual Rates
Prog. mixer
= Ten programmable mixers
Aileron diff.
= Differential aileron travel
Aileron -> rudder
= Aileron -> rudder mixer
Airbrake -> elevator
= Airbrake-> elevator mixer
Spoiler
=Camber-changing
flap mixer
Elevator -> spoiler
= Elevator -> flap mixer
Rudder -> aileron
= Rudder -> aileron mixer
Rudder -> elevator
= Rudder -> elevator mixer
Snap roll
= Snap roll
Trim Mix 1 and 2
= Trim mixers 1 and 2
Mixture adjust.
= Mixture adjustment
(carburettor)
Multi Motor
= Settings for multi-motor
models
Gyro
= Gyro settings
Additional menu points may appear if you select a different
model configuration, e.g. glider or electric-powered model.
These are listed below to ensure that you know what the
abbreviations mean.
Flap settings
= Wing flap settings
Ail. -> flap
= Aileron -> flap mixer
Ail. -> brake flap
= Aileron -> brake flap mixer
Spoiler -> elevator
= Spoiler -> elevator mixer
Flap -> elevator
= Flap ? elevator mixer
Butterfly
= Butterfly (Crow) mixer
Ailvator
= Divided elevators with
aileron function
V-tail
= V-tail mixer
Winglet
= Winglet mixer for flying
wing models
Motor
= Settings for electric
motors
• MODEL MENU - OVERVIEW OF MODEL HELICOPTERS
The following menu points are offered for the current model
configuration:
Servo monitor
= Servo travel display
Flight mode
= Flight mode select
Transmitter control AFR / D/R = Transmitter control travel
settings, Dual Rates
Prog. mixer
= Ten free programmable mixers
Coll. curve
= Collective pitch curve settings
Throttle curve
= Throttle curve settings
Acceleration
= Acceleration, throttle / collec
tive pitch function
Auto-rotation
= Auto-rotation settings
Swashplate Mix.
= Swashplate mixer
Throttle / motor Mix
= Swashplate ? throttle mixer
Coll. ? needle
= Collective pitch ? needle valve
mixer
Coll. ? tail
= Tail rotor mixer
Mixture adjust.
= Mixture adjustment
(carburettor)
Gyro
= Gyro settings
Speed gov.
= Rotational speed governor
(regulator)
Note:
The following section does not cover all the options, as some
of them have already been discussed in the Base menu sec-
tion, and others are described in the Model Type menus (next
section), where these menus can also be activated. This sec-
tion only analyses those options which are independent of the
model category (type).
54
