ROBBE-Futaba FX-40, Operating Instructions Manual

Page: 19 / 105

F X - 4 0
19
Q Q2
5 4
S2 S
12
3
6
W
W2
B
B2
Q Q2
9 8 5 7 4 10
3
6
1
Q Q2 W
5 4 7 8
W2
1
NOTE!
All model types are available when twelve-channel PCM-G3 mode is selected. If you select FM 8-channel or PCM 1024, the num-
ber of available model types is reduced. In this case only the model types shown with a grey background are available.
VC 1 … 4 are virtual functions without physical receiver outputs; these functions affect multiple servos, e.g. the butterfly (crow)
function.
In the case of flying wings the elevator is also a virtual function.
MODEL HELICOPTERS
NOTE!
All model types are available
when twelve-channel PCM-G3
mode is selected. If you select
FM 8-channel or PCM 1024, the
number of available model types
is reduced. In this case only the
model types shown with a grey
background are available.
VC 1 … 4 are virtual functions
without physical receiver out-
puts; these functions affect multi-
ple servos.
H1 + 2, HE3 90°, HR3 120°
HN3 120°, H3 140°
1 Throttle - Gas Throttle - Gas
2 Rudder - Heckrotor Rudder - Heckrotor
3 Gyro - Kreisel Aileron - Roll
4 Aileron - Roll Elevator - Nick
5 Elevator - Nick Pitch
6 Pitch Elevator 2 - Nick 2
7 Governor - Drehzahlregler 1 Gyro - Kreisel
8 Governor 2 - Drehzahlregler 2 Governor - Drehzahlregler 1
9 Needle - Gemischverstellung Governor 2 - Drehzahlregler 2
10 AUX 3 - ZUS 3 Needle - Gemischverstellung
11 AUX 2 - ZUS 2 AUX 2 - ZUS 2
12 AUX 1 - ZUS 1 AUX 1 - ZUS 1
VC1 AUX 1 - ZUS 1 AUX 1 - ZUS 1
VC2 AUX 1 - ZUS 1 AUX 1 - ZUS 1
VC3 AUX 1 - ZUS 1 AUX 1 - ZUS 1
VC4 AUX 1 - ZUS 1 AUX 1 - ZUS 1
Kanal
CH
Heli 4