Pub. 610E0003 - JUNE 2014
C1
M O D E L , E L I M I N A T O R
T M
I I - C O M B O S H E L T E R
T M
I I
Table of Contents
File Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
General Precautions . . . . . . . . . . . . . . . . . . . . . . . . . .1
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Illustrations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . .1
Care & Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . .1
File Information
Document Name:
610E0003
Date Last Revised:
06/30/2014
Revision:
4
General Precautions
Introduction
Thank you for purchasing a Rite-Hite
®
Eliminator™ II or
ComboShelter™ II dock shelter. For other applications,
please contact your local Rite-Hite
®
Sales
Representative.
Preparation
Remove all of the contents from the containers and
check for damage. If any product shows signs of dam-
age, contact Rite-Hite
®
Products Corporation, or your
local sales representative.
Illustrations
Illustrations for this document are contained on drawing
#610E-0004
Installation Instructions
This manual serves as a guide to the installation
instructions that are attached. The factory will provide
the appropriate installation instructions that the unit
configuration requires. If the appropriate installation
instructions have not been sent, any procedures for the
installation of this dock seal have not been included in
this manual, or instructions are not complete, contact:
Rite-Hite Environmental Enclosures Corporation
8900 North Arbon Drive
P.O. Box 245020
Milwaukee, WI 53224-9520
The following installation instructions have been
attached:
Component
Document#
610 Series Side Frames
56560007
610 Series Side Curtain
28600003
Collapsible Style Draft Pad
41080001
Canopy Style Header
16100003
C-Style Curtain
28610002
C4-Style Curtain
28620002
Gutter Assembly
51620004
610 Series Bumper
15310002
Optional Components
Additional installation instructions may be attached
depending on the options chosen, and application of the
unit.
Care & Maintenance
Metal hoods are recommended for protection of seals
and shelters against possible damage from rain, snow
and ice on docks which do not have building projections
and/or canopies.
Occasional cleaning of the seal or shelter is
recommended. Use a low pressure hose, or damp cloth
to wash unit.
All dock seal or shelter headers should be inspected
periodically for damage and replaced when appropriate.
Headers with the optional Firefighter™ system feature
employ heat dissipating fabric technology. To ensure
maximum effectiveness, the Firefighter system should
be periodically inspected for damage or tears. The
Firefighter header should be replaced in the event the
outer Durathon™ fabric and/or inner foil layers are
damaged and base fabric or header foam is exposed.
WARNING
Post safety warning and
barricade work area, at dock level
and ground level to prevent
unauthorized use of the dock
position while service work is
being performed.
Summary of Contents for ELIMINATOR II 610 Series
Page 12: ...610 SERIES SIDE FRAME D5 Pub 56560007 Rev 4 JUNE 2014 FIGURE 5 FIGURE 6 FIGURE 7...
Page 27: ...610 C STYLE CURTAIN OPERATION OF PULL ROPES Pub 28610002 Rev 2 JUNE 2014 G4 FIGURE 5...
Page 38: ...38 Pub ECII 610 Rev 11 September 2015 ELIMINATORTM II COMBOSHELTERTM II 610 SERIES NOTES...
Page 39: ...Pub ECII 610 Rev 11 September 2015 39 ELIMINATORTM II COMBOSHELTERTM II 610 SERIES NOTES...
