610 SERIES SIDE CURTAIN
E2
Pub. 28600003 Rev. 1 - JUNE 2014
Common
Member Eliminator
TM
II
These instructions illustrate how to install a pair of
Eliminator™ II Side Curtains on a common member
side frame.
1. Align top edge of side curtain to top edge of side
frame at the same time aligning one of the velcro
flaps on the inside of the side curtain to the velcro
on the inside of the side frame on the same side.
(See Figure 3)
2. Make sure that the velcro flap completely covers the
velcro on the side frame.
3. Continue to align the velcro flap to the side frame
velcro at the top, and continue working downward to
the bottom of the side frame. Keep continuous
downward pressure on side curtain to avoid
wrinkles in fabric.
4. Starting at the top, repeat Steps 1 & 2, to the other
inside velcro flap on the side curtain assembly.
However, after the velcro is attached, an adjustment
may be needed to align the curtains properly. It is
important to make sure that the side curtains are
perpendicular to the side frame when finished.
Standard
Eliminator
TM
-Gapmaster
TM
II
These instructions illustrate how to install a pair of
Eliminator™-GapMaster
TM
II Side Curtains that are on
a stand alone unit.
1. Align top edge of side curtain to top edge of side
frame at the same time aligning the velcro flap on
the outside of the side curtain to the velcro on the
outside of the side frame. (See Figure 4)
FIGURE 2
FIGURE 3
FIGURE 4
Summary of Contents for ELIMINATOR II 610 Series
Page 12: ...610 SERIES SIDE FRAME D5 Pub 56560007 Rev 4 JUNE 2014 FIGURE 5 FIGURE 6 FIGURE 7...
Page 27: ...610 C STYLE CURTAIN OPERATION OF PULL ROPES Pub 28610002 Rev 2 JUNE 2014 G4 FIGURE 5...
Page 38: ...38 Pub ECII 610 Rev 11 September 2015 ELIMINATORTM II COMBOSHELTERTM II 610 SERIES NOTES...
Page 39: ...Pub ECII 610 Rev 11 September 2015 39 ELIMINATORTM II COMBOSHELTERTM II 610 SERIES NOTES...
