RITE-HITE ELIMINATOR II 610 Series, Installation Instructions & Owner'S Manual

Page: 3 / 40

Pub. ECII 610 Rev. 11 - September 2015 A
3
TABLE OF CONTENTS
The following installation instructions are a compilation of the various components needed to
comprise an Eliminator
TM II or ComboShelter TM II model. There may be some components included in
these instructions that do not apply to the unit being installed. Below is guide to the various
components included.
Section Section/Page Publication No. Rev.
Cover A1 ECII 610 11
Warranty Statement A2 ECII 610 11
Table of Contents A3 ECII 610 11
Order of Installation A4 ECII 610 11
Exploded View A5 610E0002 6
Quality Check List B1 610E0030
Model, Eliminator
TM
C1 610E0003 4
Side Frame D1 56560007 4
Side Curtain E1 28600003 1
Canopy Style Header F1 16100003 6
C Style Face Curtain G1 28610002 2
C4 Style Face Curtain H1 28620002 4
Gutter Assembly I1 51620004 2
“610 Series” Bumper J1 15310003 3
Draft Pad K1 41090004 3
Options inserted as required:
Header Blockouts M
Side Frame Blockouts M
Foam Backers M (Not used on Combo II)
Foam Backer Blockouts M (Not used on Combo II)
ELIMINATOR TM II-COMBOSHELTER TM II 610 SERIES