610 SERIES SIDE CURTAIN
Pub. 28600003 Rev. 1 - JUNE 2014
E3
2. Make sure that the velcro flap on the outside of the
side curtain completely covers the velcro on the
side frame. (See Figure 5)
3. Continue to align the velcro flap to the outside of the
side frame velcro at the top, and continue working
downward to the bottom of the side frame. Keep
continuous downward pressure on side curtain to
avoid wrinkles in fabric.
4. Starting at the top, repeat Steps 1 & 2, to the inside
velcro flap on the side curtain. However, the
Eliminator™-GapMaster
TM
II side curtains are
intentionally made to “toe” or angle inward toward
the door opening or building wall. (See Figure 5)
The outside velcro flap on side curtain is made
longer than the inside velcro flap. This is done to
reduce the effects of the hook pushing the curtain
face out on the header assembly. It is important to
make sure the side curtains are installed in this
fashion. The inside velcro flap on the side curtain
will overlap and go past the velcro on the inside of
the side frame. This is normal.
FIGURE 5
Summary of Contents for ELIMINATOR II 610 Series
Page 12: ...610 SERIES SIDE FRAME D5 Pub 56560007 Rev 4 JUNE 2014 FIGURE 5 FIGURE 6 FIGURE 7...
Page 27: ...610 C STYLE CURTAIN OPERATION OF PULL ROPES Pub 28610002 Rev 2 JUNE 2014 G4 FIGURE 5...
Page 38: ...38 Pub ECII 610 Rev 11 September 2015 ELIMINATORTM II COMBOSHELTERTM II 610 SERIES NOTES...
Page 39: ...Pub ECII 610 Rev 11 September 2015 39 ELIMINATORTM II COMBOSHELTERTM II 610 SERIES NOTES...
