Reference Manual Rev 1.13
004R-646-113
Page 79
PLS.NUM Values
<NUM>
DLY.ON
: Delay for logic setpoints before setpoint
becomes active.
HLD.OFF
: Delay for logic setpoints before setpoint
becomes inactive.
NAME
: Give the setpoint a name, this will be shown
when editing targets for OVER or UNDER type
setpoints.
REG
: If source of REG is selected then you can set
the register number here
1 to 20
Default 1
(****)
NB:
Only for PULSE
TIMING setpoint.
RST.LGC Values
<OPT>
HIGH
(Default)
, LOW
DLY.ON Values
<NUM>
0.00 to 10.00s
Default 0s
(***)
NB:
Only for LGC.AND,
LGC.OR and LGC.XOR
setpoints.
HLD.OFF Values
<NUM>
0.00 to 10.00s
Default 0s
(***)
NB:
Only for LGC.AND,
LGC.OR and LGC.XOR
setpoints.
NAME Values
<STR>
6 character String
