Reference Manual Rev 1.13
Page 72
004R-646-113
12.5. SER.NET
Path
Description
└ SER.NET
└
ADDR
└
NUM
└ STRT.CH
└ END.CH.1
└ END.CH.2
└ NET.n
└
TYPE
└
SERIAL
└
RESP
└
SOURCE
Configure the serial networking support.
ADDR
(Address): Address of instrument (1..31).
NUM:
sets the number of networks
STRT.CH
(start character): Character for lua buffer
to indicate start of new message.
END.CH.1
(end character): Character for lua buffer
to indicate end of new message.
END.CH.2
(end character): Character for lua buffer
to indicate end of new message.
TYPE
: Type of Network Protocol:
NONE: Disable networking
RINCMD: See Network Communications
page 91.
SIMPLE: See Network Communications page
91.
BARCODE (K404 and K405 only): Use a
barcode reader for truck selection.
LUA BUFFER (K422 only): Buffer all comms
for Lua module to read.
SERIAL
: Serial Port to use.
RESP
: Respond to simple protocol commands with
OK.
SOURCE
: Barcode protocol source, settable to
product name (NAME), product barcode (B.CODE)
or product ID (ID).
ADDR Values
<NUM>
1..31
NUM Values
<OPT>
-1-
(Default)
.. -2-
TYPE Values
<OPT>
NONE, RINCMD
(Default)
,
SIMPLE, BARCODE, LUA
BUFFER
SERIAL Values
<OPT>
SER1A
(Default)
, SER2A,
SER3A
RESP Values
<OPT>
NONE
(Default)
, OK
SOURCE Values
<OPT>
NAME
(Default)
, B.CODE, ID
