Rinstrum AxleweighR R420, Reference Manual

Page: 57 / 142

Reference Manual Rev 1.13
004R-646-113
Page 57
12.1.6. ID.NAME (User Defined Strings)
Path Description
GEN.OPT
└ ID.NAME
└ NAME.1
└ NAME.2
└ NAME.3
└ NAME.4
└ NAME.5
There are five User Strings available to the operator
when the ‘5’ key is pressed for 2 seconds (function
‘ID’).
NAME.1, NAME.2, NAME.3, NAME.4 and NAME.5
specify the actual prompts displayed for the
operator. The values that the operator enters are
used for printing and other application functions.
(E.g. to allow the operator to enter a customer ID,
NAME.1 could be set to ‘CUST’.)
To remove a User String from the operator menu
give it an empty name.
Values
<STR>
Maximum 6 characters.
12.1.7. POWER (Power options)
Path Description
GEN.OPT
└ POWER
└ AUT.OFF
└ START
AUT.OFF (Auto-off delay)
Sets the automatic power off setting. The
instrument will switch off after set minutes of
inactivity. NEVER disables the auto power off
feature.
START (Pause at Start-up)
If ON the START function forces the instrument to
pause on power up and prompt the operator to
continue. This ensures that restarting the
instrument does not go unnoticed.
AUT.OFF Values
<OPT>

NEVER
(Default)

1 min

5 min

10 min

60 min
START Values
<OPT>
OFF (Default) , ON
12.1.8. STR.EDT (String Edit Mode)
Path Description
GEN.OPT
└ STR.EDT
Sets the mode that the string editor will start in.
Values
<OPT>

NUM
(Default)

AUTO

STRING
12.1.9. USR.DEF (Set all non-calibration settings to defaults)
Path Description
GEN.OPT
└ USER.DEF
Sets all general instrument settings to defaults.