manualshive.com logo in svg

Rinstrum AxleweighR R420, Reference Manual

Share
Download
Rinstrum AxleweighR R420 Reference Manual Download Page 26

Reference Manual Rev 1.13 

Page 26 

004R-646-113

 

5.2.  Operation Keys 

5.2.1.  Turn Instrument ON - Short press <Power> 

 

5.2.2.  Turn Instrument OFF - Long press <Power> 

 

5.2.3.  Additional Power Information 

Power Key Locked:

  If the power key is locked, the Instrument cannot be turned off 

from the front keypad. 

Automatic Operation:  

Instrument will operate whenever external power is 

available and will not need to be manually turned on again if the power is 
interrupted. 

5.3.  Zero Key 

When an empty scale has drifted away from a true zero reading, this key 
is used to perform a zero adjustment on the scale display.  The zero 
adjustment is stored when power is removed and is re-used when next 
powered up. 

The amount of weight that may be cancelled by the 

<ZERO>

 key is limited by the 

Z.RANGE setting (12.3.2  OPTION (Scale options), p64).  

 

Summary of Contents for AxleweighR R420















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands