Rigol DG4062, User Manual

Page: 52 / 238

RIGOL Chapter 2 Basic Waveform Output
DG4000 User's Guide
2-2
To Select the Channel
Users can configure DG4000 to output basic waveform from a single channel or
from dual channels at the same time. Please select the desired channel before
configuring waveform parameters. At start-up, CH1 is selected by default.
Press
CH1 or CH2 at the front panel and the corresponding area in the user
interface is illuminated. At this point, users can configure the waveform and
parameters of the channel selected.
Note: CH1 and CH2 cannot be selected at the same time. Users can first select
CH1 and then select CH2 after configuring the waveform and parameters of CH1.