Rigol DG4062, User Manual

Page: 166 / 238

RIGOL Chapter 9 Store and Recall
DG4000 User's Guide
9-8
pinyin of a Chinese character, use the numeric keyboard to select the No.
of the desired Chinese character (if the desired Chinese character is not
currently displayed, use the direction key to open the next page) and the
Chinese character selected would be displayed in the "Filename Input
Area". Use the same method to input all the Chinese characters needed.
You can press
Delete to delete the character in the "Pinyin Input Area"
and then the Chinese character at the cursor currently in the "Filename
Input Area".
4. Save the file
After finishing inputting filename in the filename input interface, press
Save,
the generator will save the file under the currently selected directory with the
specified filename and file type and display corresponding prompt message
when the save operation succeeds.
Read
1.
Select the file type
Follow the introduction in "
File Type" to select the type of the file to be read.
Note:

If File Type is currently set to "All File", the file to be read is the file
currently selected.

Txt File and Csv File are only available when "D:" is currently selected.
2. Select the file to be read
Set
Browser as "Dir" and use the knob to select the directory in which the file
to be recalled is stored. Then set
Browser as "File", and use the knob to
select the file to be recalled.
3. Read the file
Press
Read and the generator will read the currently selected file and display
corresponding prompt message when the read operation succeeds.