Rigol DG4062, User Manual

Page: 181 / 238

Chapter 10 Utility Functions and System Settings RIGOL
DG4000 User's Guide
10-11
IP Configure Mode
IP configure mode could be DHCP, Auto IP or Manual. If the network is
disconnected currently, there will be nothing to display behind "IP Configure
Mode:". In different IP configuration modes, the configuration modes of network
parameters (such as IP address) are different.
1.
DHCP

In DHCP mode, DHCP server in the current network assigns LAN
parameters, e.g. IP address, for the generator.

Press DHCP to select "On" or "Off" to turn DHCP mode on or off.
2.
Auto IP

In AutoIP mode, the generator acquires IP address within 169.254.0.1
and 169.254.255.254 and subnet mask 255.255.0.0 automatically
according to the current network configuration.

Press Auto IP to select "On" or "Off" to turn Auto IP mode on or off.
When the DHCP mode and Auto IP mode are turned on at the same time,
the instrument will use the DHCP mode; therefore, to enable this mode,
set
DHCP to "Off".
3.
Manual

In Manual mode, the LAN parameters of the generator, e.g. IP address,
are defined by users.

Press
Manual to select "On" or "Off" to turn Manual mode on or off.
When all the three IP configuration modes are "On", the priority of
parameters configuration from high to low is "DHCP", "Auto IP" and
"Manual"; therefore, to enable this mode, set
DHCP and Auto IP to
"Off".

The IP address format is nnn.nnn.nnn.nnn. The first nnn ranges from 1 to
223 (except 127) and the other three nnn range from 0 to 255. It is
recommended that users acquire an available IP from their network
administrator.

Press IP Addr and use the numeric keyboard and direction keys to enter
your desired IP. The setting is stored in the non-volatile memory and will
be loaded automatically when the generator is powered on the next time
if
DHCP and Auto IP are set to "Off".