Rigol DG4062, User Manual

Page: 208 / 238

RIGOL Chapter 10 Utility Functions and System Settings
DG4000 User's Guide
10-38
LEFT|RIGHT|KNOB /*Direction keys and knob*/
NUM0|NUM1|NUM2|NUM3|NUM4|NUM5|
NUM6|NUM7|NUM8|NUM9|DOT|SIGN|
ENTER|CANCEL|DELETE /*Numeric keyboard*/
COUNTER /*Frequency counter*/
ALL /*All the keys (except the
power key) and knob at the
front panel*/
{ON|OFF|0|1} is used to lock or unlock the keys and can be ON|1 (locking the
specified key) or OFF|0 (unlocking the specified key).
2. Using the following 3 modes to lock or unlock the keys
(1)
Send command via Ultra Sigma to lock or unlock the specified
key

Build the communication between the signal generator and PC.

Run Ultra Sigma and search for instrument resource.

Open the remote command control panel and send the command.
(2) Program and send command to lock or unlock the specified key

Build the communication between the signal generator and PC.

Use a programming language (such as LabVIEW and C#) to program
and send command.
(3) Read the command file in the USB storage device to lock or
unlock the specified key
The content and format requirements of the command file are as follows.
Filename Suffix
Command
Empty Row