Rigol DG4062, User Manual

Page: 36 / 238

RIGOL Chapter 1 Quick Start
DG4000 User's Guide
1-10
Pulse----Pulse
Generate a pulse waveform with frequency from 1μHz to 40MHz and variable
pulse width and edge time.

When this function is selected, the backlight of the key turns on.

You can modify the "Freq/Period", "Ampl/HiLevel", "Offset/LoLevel",
"Width/Duty", "Leading", "Trailing" and "Start Phase" of the pulse
waveform.
Noise----Noise
Generate a Gauss noise with 120MHz bandwidth.

When this function is selected, the backlight of the key turns on.

You can modify the "Ampl/HiLevel" and "Offset/LoLevel" of the noise.
Arb----Arbitrary Waveforms
Generate an arbitrary waveform with frequency from 1μHz to 40MHz.

The instrument supports point by point output mode.

The instrument can output the 150 kinds of built-in waveforms and the
arbitrary waveforms stored in USB storage device.

The instrument can also output the arbitrary waveforms (16 kpts) edited
from the front panel or through the PC software and then downloaded to
the instrument by the users.

When this function is selected, the backlight of the key turns on.

You can modify the "Freq/Period", "Ampl/HiLevel", "Offset/LoLevel" and
"Start Phase" of the arbitrary waveform.
Harmonic----Harmonic
Generate harmonics with frequency from 1μHz to 80MHz.

The instrument can output up to 16
th
order of harmonic.

Users can set the harmonic "Order", "Type", "Ampl" and "Phase".
User----User-defined Waveform Key
Users can define the frequently used built-in waveform or stored waveform as
shortcut (
Utility

UserKey). And then, in any operation interface, press
User to quickly open the desired waveform and set its parameters.