40
higher quality of binding. When the close-forward button is pressed, the jogger stops
and it will start again when the carriage clamp arrives back to initial position.
19.
Padding mode
When activated the binding plates are out of order, the book can be
binded without the cover and without by the pressing of the binding
plates.
20.
Book dropping mode
When the binding unit finished there are two possibility for book
dropping:
a.)
the carriage clamp stay at bottom position than relase the book
b.)the carriage clamp moves upwards than releleasy the book
The way of the book droppin can be choosed with the mentioned icon.
21.
Standby mode
In case the working process has to be paused the machine can be switched
into standby mode by pressing the “Standby icon”
By activating this function the motors of the machine stops, than in 30
minutes the heating temperatures reducing, and the machine going out of the ready
state. In case of touching any button of the machine or activating any sensor of it
the standby mode deactivated. The standby mode switching ON automatically in case
the operator does not touch the machine for half an hour.
22.
Cover positioning
By pressing the cover positioning icon the middle and the rear binding
plates are moves into „binding position” , in this way before the binding
procedure starts the correct cover position can be checked
23.
Exit of this screen
