29
Tel: +4
5 36173363
, e-mail:
3. Remove the packaging plastic foil, take the
stacker and the vacuuming unit off. Turn the
machine on the palette to be able to lift it at
the two end with two palette transporters.
After lifting take the palette off. Before
lowering the machine, place
the feet.
4. The room in which the machine is installed has to be dry and well aerated. Do not
use the machine within steamy, wet, dusty or explosive surroundings. Place the
machine to be around minimum 1 meter free space. Connect the vacuuming system,
the stacker unit and the pressed air to the machine.
NOTICE!
Do not attach other network appliances into the sockets placed in the machine.
These sockets serve strictly to operate the external units of the machine.
NOTICE!
The rotation direction of the milling unit must be checked. The right
direction is counterclockwise if we see the milling disk from the top.
