45
Tel: +4
5 36173363
, e-mail:
1. Testing of milling height.
2. Moving of the cover page thickness regulator.
3. Up and down moving of the carriage clamp. (vice)
Process: By clicking on the icon its outline will be red. Now the clamp can be moved
with the opening and closing buttons forward and backward. By pressing this icon
again the „Active„ text disappears.
4. Not available.
5. Moving of the carriage clamp forward and backward. (vice)
By pressing the icon icon its outline will be red. It is possible to move the carriage
forward and backward. When the carriage starts the cover plate of the milling station
opens and closes when the carriage returns to its home position.
6. Not available.
7. Switching on-off of the jogger.
8. Switching on-off of the milling motor.
9. Moving of the side gluing unit.
10. Actuation of one plate of the binding unit.
11. Close of the service menu.
12. Sensor positon adjustment.
13. Testing of the cover page feeding by moving the lever back and forth.
By clicking on the icon its outline will be red. Now the lever can be moved with
opening and closing buttons forward and backward. By pressing this icon again its
outline will be red. If there is no cover on the table then it goes down and by pressing
the icon again the table goes up.
14. Actuation of the middle binding plate.
15. Up and down moving of the suction caps of the cover page feeder.
16. Actuation of gear glue pump which circulates the PUR glue in the system.
17. Actuation of the second binding plate.
Attention! After using of the „Service” menu the machine has to be
restarted always.
3
5
4
2
1
6
7
8
9
10
11
12
13
14
15
16
17
