Ricoh RDC-6000 Page 89 Operation Manual Download

Page: 89 / 125

Erasing

Press the CANCEL

EXIT

button.

The erase menu is displayed again.

Note

• When a lower numbered file is erased, the higher numbers are reassigned.

• Files which have been set in Protect mode cannot be erased until they are

unprotected. See “Protecting a File” (p.80).

Erase All Images

All recorded files are erased.

Set the mode dial to [

Press the

▼

▲

button to select [ALL

IMAGES] and press the ENTER

Select

button.

Press the shutter release button.

All the files are erased, and return to erase
menu.

Note

• High-capacity SmartMedia cards or larger number of files may take a long

time to erase.

• Files which have been set in Protect mode cannot be erased until they are

unprotected. See “Protecting a File” (p.80).

SINGLE IMAGE

ALL IMAGES

SELECTED IMAGES

Select

MENU[ERASE]

MENU

[ERASE]

ERASE ALL

IMAGES?

EXIT

START:RELEASE

Summary of Contents for RDC-6000






























































































































Search results

Summary of Contents for RDC-6000

Reviews:

Related manuals for RDC-6000

Brands by name

Popular brands

Ricoh RDC-6000, Operation Manual

Search results

Summary of Contents for RDC-6000

Reviews:

Related manuals for RDC-6000

Brands by name

Popular brands