manualshive.com logo in svg

Ricoh RDC-6000, Operation Manual

Share
Download
Ricoh RDC-6000 Operation Manual Download Page 110

108

Accessories

Item

Model

Remarks

Remote Control Unit

SmartMedia Memory
Cards

DR-3

For drawing power directly from a household
electrical outlet. See “Using an AC Adapter”
(p.27).

Rechargeable lithium ion battery.

For remote operation of the camera’s recording
and playback functions.

A postage stamp-sized storage media with a
thickness of 0.76 (mm).

Capable of storing a maximum of (7) images
recorded in 1600N mode.

Capable of storing a maximum of (15) images
recorded in 1600N mode.

Capable of storing a maximum of (32) images
recorded in 1600N mode.

Capable of storing a maximum of (67) images
recorded in 1600N mode.

Used to insert the SmartMedia memory card
directly into the PC floppy disk drive.

This floppy disk adapter makes it possible to load
SmartMedia directly into the floppy disk drive of
the personal computer.

4 M

8 M

16 M

32 M

FS-4

FS-8

FS-16

FS-32

FS-B53

FS-B10

PC Card Adapter

Floppy Disk Adapter

• All trademarked company and product names mentioned in this manual are the property of

their respective owners.

• SmartMedia

 is a registered trademark of Toshiba Corporation.

AC adapter

Lithium Ion Battery

DB-20

AC-3

Summary of Contents for RDC-6000






























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands