Ricoh RDC-6000 Operation Manual Download

Page: 15 / 125

• All items of information are shown for illustration purposes. During actual

camera operation, only the relevant items are displayed.

■

Warning Message

If any of the warning messages listed below appear on the camera’s LCD monitor,
read the corresponding explanation and take the corrective action suggested.

Note

Warning

Message

Status

Explanation and Remedy

Reference

Page

Flashing

Lit

Flashing

Lit

Flashing

Indication low batteries. Have
replacement batteries ready

System in processing

The SmartMedia Memory Card has
run out of memory

The SmartMedia memory card is out
of position. Mount a SmartMedia
memory card

There are no files to play.
Mount a SmartMedia memory card
with files recorded on it.

A write-protected SmartMedia memory
card is found. Remove the write

protection label from the card to gain
access to it

You attempted to play an unplayable
file.

No more file numbers can be added.
Insert a new SmartMedia memory
card to continue recording.

The date has not been set. Set the
date before starting operations with
the camera.

P.27

–

P.29

P.30

P.74

P.29

P.74

P.30

P.33

CARD FULL

NO CARD

NO IMAGE

WRITE

PROTECTED

UNMATCHED

FILE

NUMBER

OVER

SET DATE/

TIME

Summary of Contents for RDC-6000






























































































































Search results

Summary of Contents for RDC-6000

Reviews:

Related manuals for RDC-6000

Brands by name

Popular brands

Ricoh RDC-6000, Operation Manual

Search results

Summary of Contents for RDC-6000

Reviews:

Related manuals for RDC-6000

Brands by name

Popular brands