Ricoh RDC-6000 Operation Manual Download

Page: 30 / 125

Make sure the camera power is turned off, then connect the AC
adapter cable to the camera power (DC IN) jack.

See

Reference: Page 41 “Turning on the Camera”.

Insert the power plug into a power outlet.

Note

• When a battery is loaded in the camera, power from the AC adapter (power

outlet) will take priority.

Important

Note

• Make sure the power plug and connecting cable are firmly inserted. Data

will be lost if the plug or cable becomes disconnected while recording.

• When the AC adapter is connected or disconnected while the camera is

being operated (recording, playback, deletion, etc.), the power will be
interrupted temporarily while the power source is being changed; therefore,
turn off the cameras power before connecting or disconnecting the AC
adapter.

Summary of Contents for RDC-6000






























































































































Search results

Summary of Contents for RDC-6000

Reviews:

Related manuals for RDC-6000

Brands by name

Popular brands

Ricoh RDC-6000, Operation Manual

Search results

Summary of Contents for RDC-6000

Reviews:

Related manuals for RDC-6000

Brands by name

Popular brands