Ricoh RDC-6000, Operation Manual

Page: 32 / 125

30
See
Contact surface
• Keep the SmartMedia memory card slot free from dust and foreign matter.
• To avoid possible hazards, keep SmartMedia memory cards away from flames and
do not dispose of them in fire.
• SmartMedia memory cards have a limited service life. Cards that have been used
over an extended period of time may fail to record additional files.
●
Data
• Data recorded on a SmartMedia memory card may be lost by improper handling by
the customer or a third party, by being subjected to electricity or electrical
interference, or during camera malfunction or repair. Ricoh Co., Ltd. assumes no
liability for damages incurred by such loss of recorded data.
• Do not remove the batteries from the camera, turn off the camera, or connect the AC
adapter while data is being recorded on the SmartMedia memory card. The data
stored on the SmartMedia memory card could be lost or damaged.
• You are advised to copy valuable data from the SmartMedia memory card onto other
media, such as floppy disks or hard disks.
Inserting a SmartMedia Memory Card
Check that the camera is turned off before inserting the SmartMedia memory card.
Important
Note
• Slide the power switch to turn the power off before inserting or ejecting smart
media; otherwise, the contents of the SmartMedia may be destroyed and the
camera may mulfunction.
■
Inserting Card
q
Check that the camera is turned off,
and then open the card cover.
“Turning on the Camera” (P.41)
w
Insert the SmartMedia memory card
into the card insert slot and close the
card door.
Push the SmartMedia memory card fully into
position, with the contact surface facing up.