manualshive.com logo in svg

Ricoh RDC-6000, Operation Manual

Share
Download
Ricoh RDC-6000 Operation Manual Download Page 88

86

Erasing a File (Image)

This section explains how to erase recorded files.  There are three ways to erase files:
single file deletion, deletion of all files and deletion of multiple specified files.

Important

Note

• Remember that files cannot be restored once they are erased.  Before

starting to erase a file, make sure that you want to erase it.

Note

• Files on a write-protected SmartMedia memory card cannot be erased

unless the write protect pad is removed from the card.  See “Protecting
Against Accidental Writing” (p.29).

• Depending on the SmartMedia capacity, it may take a short time to erase

a file after turning on the power or changing the mode dial.

Erase

The selected file is erased.

q

Set the mode dial to [

].

An erase menu will be displayed.

w

Press the 

▼

 or 

▲

 button to select

[SINGLE IMAGE] and press the ENTER

Select

 button.

e

Press the 

▼

 or 

▲

 button to select an

image file to erase, and press the shutter
release button.

The image file selected is erased.  If you want to
erase more files, repeat step 

e

  above.

 

SINGLE IMAGE

ALL IMAGES
SELECTED IMAGES
 
 
 
 

 

Select

 

MENU[ERASE]

1/12

START:RELEASE

 

EXIT

 

ERASE
 SINGLE IMAGE

Summary of Contents for RDC-6000






























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands