manualshive.com logo in svg

Ricoh RDC-6000, Operation Manual

Share
Download
Ricoh RDC-6000 Operation Manual Download Page 101

99

Miscellaneous

5

Changing the LCD Setting

The camera comes up with the LCD monitor enabled when it is powered on in a
recording mode.  You may set the camera to have the LCD monitor disabled when it is
powered on, to save the batteries.

q

Set the mode dial to [SET].

w

Press the 

▼

 or 

▲

 button to select [LCD

SETTING].

e

Press the MENU 

Change

 button to select

[OFF].

The camera, when powered on in a recording
mode, will now come up with the LCD monitor

disabled.  Press the DISPLAY button to switch
the monitor display.  See “LCD Monitor Display”
(p.41).

When the setting is complete, turn the mode dial
to switch to another mode.

Note

• The initial value is ON.

Initializing Settings

You can reset all settings, except for the date.

Important

Note

• Data set by Keep Settings will also be initialized to its factory defaults.

q

Set the mode dial to [SET].

2/2

LCD CONFIRMATION

LCD SETTING

INITIALIZE SETTING
SEQUENTIAL NO.RESET
 
 
 

ON

Change

MENU[SET UP]

2/2

LCD CONFIRMATION

LCD SETTING

INITIALIZE SETTING
SEQUENTIAL NO.RESET
 
 
 

OFF

Change

MENU[SET UP]

Summary of Contents for RDC-6000






























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands