Ricoh RDC-6000, Operation Manual

Page: 60 / 125

58
i
Press the shutter release button to take the picture.
■
When calibrating the white balance (W/B CALIBRATION)
e
Press the ▼ and ▲ buttons to select
[W/B CALIBRATION] and then press
the MENU
Adjust
button.
r
Press the shutter release button.
Place paper that passes nearly colorless light
in front of the lens.
Setting will end and the SET menu will return
when the shutter release button is pressed.
t
Press the ENTER
OK
button to
return to the record menu.
Press the CANCEL
EXIT
button.
y
Press the shutter release button to
take the picture.
Important
Note
• Even with the same subject, the color balance can differ depending on the
weather and type of light source (Tungsten or fluorescent).
Note
• The white balance may not be correct in the Auto mode when a subject
includes few white areas. In such cases, place some white object near the
subject when taking the picture.
• The flash will not fire when Daylight, Tungsten, Cloudy (overcast),
Fluorescent or User Settings is used.
• White balance can only be set while in the record mode. Setting is not
possible in the Play mode.
• Set Save Mode to save the white balance setting. Reference
➞
page 94
“Keep Settings”.
AUTO
DAY LIGHT
TUNGSTEN
OVERCAST
FLUORESCENT
USER DEFINE
W/B CALIBRATION
OK Adjust
MENU
[WHITE BALANCE]
Cancel
W
MENU
[W/BCALIBRATION]
PLACE A WHITE
PAPER IN FRONT
OF LENS!
Cancel
START:RELEASE