manualshive.com logo in svg

Ricoh RDC-6000, Operation Manual

Share
Download
Ricoh RDC-6000 Operation Manual Download Page 23

21

Playback

 Changing the Flash Mode 

(P.51-52)

q

Set the mode dial to [

].

w

 Press the flash mode button to select a

flash mode.
You can choose Flash Off (

), Auto (

),

Forced Flash (

), or Slow synchro mode

(

: flashing).

The selected mark will be displayed on the
LCD monitor or on the LCD panel.

e

Press the shutter release button to
record the image.

 Using the Self-Timer 

(P.59)

q

Set the mode dial to [

].

w

Press the self timer button.
The self timer is now set.
The 

 mark will be displayed on the LCD

monitor or on the LCD panel.

e

Press the shutter release button to

record the image.
The self timer LED will start flashing and the
shutter will be released after a delay of
about 10 seconds.

 Playing Back Files 

(P.74-79)

q

Slide the power switch on and set the

mode dial to [

].

w

Press the 

▼

 or 

▲

 button to select a file

you wish to view

* The multi-image and zoom playback features allow

you to view several image files at once or magnify an
image. (P.77)

Summary of Contents for RDC-6000






























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands